Rootstock and scion it is easy to match the U-cut,V-cut or Ω-cut, rapid healing
Quickly and easily create grafts.
Grafting method than the traditional savings the time and effort
Use the pruner to cut useless branches from the plant (Do not use on dry or old hard wood)
Overall Length: 215mm
The clean cuts made by the grafting tool allow you to get a perfect fit, every time.
This increases the likelihood of the graft 'taking', leading to much less wastage.
The 2 in 1 tool contains both a pruning and grafting guillotine.
This allows you to first prepare the plants to be grafted, by trimming away excess leaves and twigs. Then using the special grafting guillotine you can make a perfect style cut into the grafting stock.
Create precise grafts with ease
The grafting blade is able to cut through stock up to 12mm in diameter
Built in locking mechanism for addition safety
The grafting tool with “V & U & Ω” blade and the end of blade both can cut, one piece blade can be used as two pieces blade, so you would have like a total six pieces blade.
How to use:
Step 1: Hold the grafting stock in the grafting tool and squeeze the handle to make the cut, repeat this step to cut stem from the donor plant. Take care to ensure that the groove is cut in the stock plant.
Step 2: Slide the donor stem into the groove of the stock plant, matching the cut surfaces as closely as possible. If the stock and donor plant are not the same size, match on the side only.
Step 3: Place sterlizing material around the joint, and bind with tape, the sterilizing material will protect against bacteria and weather conditions.
Step 4: Use the pruner to cut useless branches from the plant.
1 x 2in-1 Grafting Tool
3 x Grafting Blade Omega Type (Installed), U -Type, V-Type
1 x Screwdriver
1 x Spanner
1 x Storage Carry Case