Power Trim Hose for Mercruiser Alpha Gen II and Bravo
New design replaces Mercruiser part numbers 32-864588 and 32-864589 (Older 32-99902, 32-99903)!
It can be confusing to find the proper replacement trim hoses for your Mercruiser unit.
These hoses are high pressure and stainless steel braided! They are custom designed to provide you with the best quality for the best price.
Please review the following items when determining which hoses you may need:
This hose fits SOME R, MR, Alpha One, Alpha Gen 2 and Bravo stern drives. There were different rams used throughout the years so the following directions are the simplest method for ordering the proper hose.
Measure from where the "rigid" tube turns back to the nut (as shown in picture ). If your hose measures approximately 11 5/8" to the end of the tube this is the hose! Measure both hoses because some may differ on port and starboard!
If your hose measures approximately 11 1/8" , this is NOT the hose (but we do carry those here too - search for TM2136)!
This hose will replace either the starboard or port side. It has been designed to permit a slight bend to either side!
There are two pictures on our website for this item (www.shop.tungstenmarine.com). If you click on the "tape measure" mini-picture and then click on it again to enlarge, you can see the hose directly on a measuring tape.
If you also need to replace the shorter hoses at the same time we carry them here. They are part number TM2103.