mp-661k magazine blackbird, drozd valve, saddle, screwdriver, air-bulb, screw clamping, key, springs, sealing o-rings, needles bulb, washers, modernized spare parts for tuning Baikal perfect suitable for all versions, newest advanced repair set "Scorpio Prince".
The proposed, advanced, fully transformable newest set "Scorpio Prince" is universal and therefore ideal for all modifications and versions, both early and new MP-661K Baikal. This set is universal and can be supplied in two versions at the request of the buyer:
1. In a transformable form in a disassembled state, as shown in the photo,
2. In a transformable form in the assembled state, and all remaining additional elements will also be sent together in the same package next to each other.
The proposed improved extended repair set "Scorpio Prince" is universal and therefore ideal for all modifications and versions, both early and new MP-661K.
The newest modernized repair set "Scorpio Prince" consists of the following improved spare parts:
1. Valve newest construction with four extended holes.
- newest valve have four holes, which significantly increase the throughput energy and as a result give powerful indicators,
- have it has enlarged bore holes with the maximum allowable diameter,
- thanks to the improved shape of each of the four holes, it was possible to achieve greater structural rigidity of the central part, which accounts for the main pressure from the hammer,
- high precision in the manufacture allowed to provide a non-deformable central and lateral edges,
- made of high-strength steel 45, followed by heat treatment 50 HRC, which raises the resource,
- durable coating, similar in characteristics to chrome plating, provides better interaction of parts,
- easy to install instead of the standard ones and do not require any special tools, they are completely interchangeable, which is very convenient and practical.
2. Bulb modern is suitable for all versions.
- made of stronger steel with the subsequent special heat treatment that significantly increased him resource,
- due to the improved design has high bandwidth,
- has a sealing ring made of high-quality, more wear-resistant solid polyurethane,
- the lower lamp insert with a sealing ring made of high-strength polyurethane, a puncture needle, a screw fixing the internal components of the insert and a filter made of high-quality stainless steel, which is made of a double micro grid with different cell diameters,
- ideal combines with the new improved valve and him seat.
3. Saddle robust newest design.
The proposed improved saddles with a new robust construction with hardened components are universal and are ideally suited for all models MP-654K, MP-661K, MP-656K, MP-562K.
Newest powerful saddles, possess the finished technically more competent and thought over design. They have a specially enlarged rear part for reliable fixing of the screwdriver in the slots, which is very convenient and now it will be much more comfortable and faster to unscrew the saddle without disruption or scratches.
The new saddles have thicker locking rear edges of optimally larger diameter, increasing strength characteristics and providing perfect fit with excellent sealing, which improves the overall performance, and also due to the tighter locking, the resource is significantly increased.
This saddles are made of sturdy steel and have the best reliable coating chemical oxidation by oiling, plus they were subjected to the most advanced innovative vacuum heat treatment (quenching), which made them much stronger and more durable, increasing the service life many times.
On these modernized seats, significantly more reliable and durable sealing elements are installed:
- the white inner ring is made of high-quality solid wear-resistant polyurethane, made according to a new technology using modern industrial molds of the new sample. The newly reinforced white inner ring does not have the property of turning yellow with time with the concomitant structural weakening, as it is made of a primal, costly material.
- the black outer ring is made of low-deformable rubber with an optimal level of elasticity and thicker walls to provide excellent sealing, which contributes to a noticeable increase in service life. The new reinforced outer black ring has an excellent surface roughness, which provides an ideal level of contacting elements for better interaction of parts of the node, and it also has a pleasant appearance with glitter.
4. Corps valve upgraded.
The proposed valve body has an increased pre-valve volume, which is achieved by transferring the needle and mesh closer to the neck of the cylinder, due to which this volume increases, which has a positive effect on the main indicators. Made of strong steel 50, followed by heat treatment, has a durable coating.
5. Two springs with new durable follower.
The proposed spring and a pusher of an improved design, which is made of reinforced steel with hardening using more advanced technology, thanks to which it has become even stronger and more durable, as well as its improved shape contributes to more comfortable use, as the load decreases and increases convenience fixation.
6. Screw clamping and more convenient, suitable for all generations and any modifications! The main advantages of using the proposed improved screw:
- has a built-in steel swivel,
- made of durable steel,
- provides a comfortable grip for screwing in with your fingers,
- allows to significantly reduce gas losses, due to the fact that the time between the puncture is significantly reduced to complete sealing,
- improves ease of use, thanks to the opportunity that appeared quickly and without additional devices to change the cartridge.
7. High quality sealing elements from expensive wear-resistant materials, new professional complete set for connoisseurs.
The proposed sealing elements is great for all generations MP-654K and MP-661K "Drozd", "Blackbird". All sealing rings in this improved set are made of durable, expensive materials without any defects, unlike cheaper copies, which are now mainly on the market, as well as in comparison with other low-quality counterparts on the new improved rings there is no unnecessary side burr (additional protruding pieces of material). The diameter of all the rings in the new improved full set is the most optimal, which has a positive effect on the interaction of parts and improves their performance, thanks to this, an ideal tightness is achieved and, as a consequence, increased performance, which is maintained for a very long time. The most important resource of the new improved kit is many times higher than that of its cheaper and lower-quality copies (analogs with unsecured dimensions and pieces of unnecessary material sticking out along the edges), therefore the new improved set of sealing elements turns out to be economically much more profitable and justified. as its service life is many times longer, the advantage is that now it’s not necessary to disassemble and reassemble the valve assembly often, having to replace the seals in it each time, which in turn is It is tangibly reflected in the service life of all other steel components, since they erase the coating and quickly wear out the existing fine thread, due to this unit is better disassembled extremely rarely, which will make it possible to make a new improved set. The new improved full set includes the following components:
- valve sealing rings(four pieces) made of durable polyurethane are transparent with a pleasant golden tint and they have the smaller diameter of all presented, fit snugly to the valve walls). high quality sealing elements from expensive wear-resistant materials (new professional improved complete set for connoisseurs,
- sealing flat rings(six pieces) of the bulb for installation in its lower part, also made of durable polyurethane,
- the black bulb sealing rings(five pieces) for installation in its upper part. These rings with thick walls were made on a new technological mold for their manufacture, a special material was selected that has a high resistance to strong cooling and at the same time it is not deformed, at the same time maintaining an optimal elasticity important for these sealing rings for a long time without losing its strength characteristics,
- the sealing rings(five pieces) of the valve seat are black. They have the largest diameter with the thinnest walls. Made of a more durable material and have an optimal level of elasticity).
8. Reinforced valve springs with durable coating (three pieces),
9. Washers valve made of solid steel(two pieces),
10. Hardened steel needles(three pieces),
12. The largest and oblong of durable steel lower part of the body,
13. Screwdriver convenient, compact and reliable key for complete, more comfortable and quick disassembly to replace all replaceable components.
The package delivery includes newest improved, advanced repair set "Scorpio Prince".