Repair kit MP-654K for magazine upgrade generations 1-4 and gen 5 with numbers starting T 150... , T 160... for a wide frame, tuning kit made on order. The parts for modernization in extended improved advanced kit "Scorpio".
The proposed extended, fully transformable repair kit "Scorpio" is universal and therefore ideal for all modifications and versions, both early and new MP-654K generations 1-4 and 5 starting numbers T 15…, T 16… with a wide frame. This kit is universal and can be supplied in two versions at the request of the buyer:
1. in a transformable form, in a disassembled state, as shown in the photo,
2. in a transformable form, in the assembled state, and all remaining additional elements will also be sent together, ie in the same package next to each other.
The advanced repair kit "Scorpio" consists of the following improved parts:
1. Valve with improved shape,
- made of high-strength steel 45 followed by heat treatment 50 HRC - they have an increased resource,
- has four holes of optimal diameter, due to which the throughput is significantly increased, which as a result significantly improves the performance,
- durable coating, similar in characteristics to chrome plating, provides better interaction of parts,
- improved valve is installed instead of the standard one without any modifications - fully interchangeable.
2. Air-bulb with modernized design is suitable for all generations and any modifications,
- made of stronger steel with the subsequent special heat treatment that significantly increased him resource,
- due to the improved design has high bandwidth,
- Included is a special durable stainless steel filter with built-in double micro grid of different parameters for even greater structural gain,
- has a sealing ring made of high-quality, more wear-resistant solid polyurethane,
- ideal combines with the new improved valve and him seat.
3. Saddle valve with reinforced construction,
The proposed improved valve saddle has an increased resource, that is, it is much more durable, thanks to a special heat treatment, as well as the composition of the improved saddle includes high-quality sealing elements of more wear-resistant materials (solid polyurethane and durable rubber).
4. Corps valve with upgraded design,
The proposed valve corps has an increased pre-valve volume, which is achieved by transferring the needle and mesh closer to the neck of the cylinder, due to which this volume increases, which has a positive effect on the main indicators. Made of strong steel 50, followed by heat treatment, has a durable coating.
5. Spring and new durable pusher.
The proposed spring and a pusher of an improved design, which is made of reinforced steel with hardening using more advanced technology, thanks to which it has become even stronger and more durable, as well as its improved shape contributes to more comfortable use, as the load decreases and increases convenience fixation.
6. Screw clamping spray and more convenient, suitable for all generations and any modifications! The main advantages of using the proposed improved screw:
- has a built-in steel swivel,
- made of durable steel,
- provides a comfortable grip for screwing in with your fingers,
- allows to significantly reduce gas losses, due to the fact that the time between the puncture is significantly reduced to complete sealing,
- improves ease of use, thanks to the opportunity that appeared quickly and without additional devices to change the cartridge.
7. Functional plastic box!
The proposed plastic box is designed for increased convenience of storage and transfer of consumables. This box is made of sturdy plastic and has an opening top cover and a special locking device on the bottom, thanks to which the box is tightly fixed on the case.
8. High quality sealing elements from expensive wear-resistant materials (new professional complete set for connoisseurs)!
The proposed sealing elements are great for all generations MP-654K and MP-661K "Drozd". All sealing rings in this improved set are made of durable, expensive materials without any defects, unlike cheaper copies, which are now mainly on the market, as well as in comparison with other low-quality counterparts on the new improved rings there is no unnecessary side burr (additional protruding pieces of material). The diameter of all the rings in the new improved full set is the most optimal, which has a positive effect on the interaction of parts and improves their performance, thanks to this, an ideal tightness is achieved and, as a consequence, increased performance, which is maintained for a very long time. The most important resource of the new improved kit is many times higher than that of its cheaper and lower-quality copies (analogs with unsecured dimensions and pieces of unnecessary material sticking out along the edges); therefore the new improved set of sealing elements turns out to be economically much more profitable and justified. as its service life is many times longer, the advantage is that now it’s not necessary to disassemble and reassemble the valve assembly often, having to replace the seals in it each time, which in turn is It is tangibly reflected in the service life of all other steel components, since they erase the coating and quickly wear out the existing fine thread, due to this unit is better disassembled extremely rarely, which will make it possible to make a newest sealing O-rings.
- valve sealing rings made of durable polyurethane are transparent with a pleasant golden tint and they have the smaller diameter of all presented, fit snugly to the valve walls). This sealing elements from expensive wear-resistant materials (four pieces),
- air-bulb sealing flat rings for installation in its lower part, also made of durable polyurethane (four pieces),
- air-bulb sealing rings in black color for installation in its upper part. These rings with thick walls were made on a new technological mold for their manufacture, a special material was selected that has a high resistance to strong cooling and at the same time it is not deformed, at the same time maintaining an optimal elasticity important for these sealing rings for a long time without losing its strength characteristics (four pieces),
- saddle valve sealing rings in black color. They have the largest diameter with the thinnest walls. Made of a more durable material and have an optimal level of elasticity (four pieces).
8. Reinforced valve springs with durable coating (two pieces),
9. Washers valve made of solid steel (two pieces),
10. Lamp filters made of sturdy stainless woven micro grid (two pieces),
11. Hardened steel lamp needles (two pieces),
12. The largest and oblong of durable steel main part of the corps,
13. Convenient, compact and reliable key for complete, more comfortable and quick disassembly to replace all replaceable (spare) components.
The package delivery includes advanced repair kit "Scorpio".