Multi-Code 3028 12/24 Volt Single Two Channel Gate Or Garage Door Opener Radio Receiver With F-Connector Antenna 10 DIP On/Off Type Code Switch On 300MHz or 310MHz 1099500 Now Manufactured by Linear Corporation MSC302850.
Replaces Multi-Code 3028, Stanley 203102. Compatible with Multi-Elmac 10 DIP code switch type garage door openers
This Multi-Code model 3028 also listed as the 302850 is a two channel, 12 or 24 volt, F-connector type antenna gate or garage door opener radio receiver that works with all Multi-Code and Stanley compatible remote controls that have 10 DIP type code switches on 300Mhz or 310Mhz. The MultiCode 302850 is manufactured by Linear Corporation part number MSC302850 that replaces some of the older models. This radio receiver features auto voltage sensing for 12 or 24 volt AC or DC systems and can work on Multi-Code 300MHz or Stanley 310MHz frequencies by changing an internal jumper. The Multi-Code 302850 receiver can control up to two gate or garage door openers or one gate or garage door opener with an optional wireless safety edge 3022 remote control transmitter. Having an F-connector type antenna allows for the antenna to be remotely located from the receiver using the optional Multi-Code 106603 remote antenna kit (sold separately) to obtain maximum receiver range, especially if the receiver is located inside a metal enclosure that would block the remotes signal. This is a brand new item that comes in a plain white dealer box. Includes 8" wire antenna, 3 ft. coaxial cable, bulkhead F-connector and programming instructions.
Replaces Multi-Code 3028, Stanley 203102.
PLEASE NOTE: This radio receiver is a Multi-Code brand name radio receiver and is not a universal type of radio receiver.
The Multi-Code 302850 by Linear Corporation MCS302850 radio receiver is directly compatible with the following model remotes to control two devices:
Challenger: MC1010, MC1020, MC4210, MC4220.
Digi Code: 5010, 5060, 5030, 5040, 5070.
Heddolf: M219, M220.
Multi-Code: 1083, 3060, 3070, 3083, 3089, 4120, 4140.
Multi Elmac: 3089.
Not all compatible models may be listed
Activates one gate or garage door opener or one gate opener with wireless safery edge transmitter
Dual frequency can be set to either Multi-Code 300MHz or Stanley 310MHz mode by internal jumper
Auto voltage sensing no jumper needed to set operating voltage
Ideal for use on gate openers
Antenna with 3 ft. coaxial cable and bulkhead connector are included
Optional remote antenna mounting kit for maximum range sold separately
One-Year manufactures warranty
Power: 12-30 Volts AC or 10.5-30 Volts DC
Frequency: 300MHz or 310 MHz jumper selectable
Contacts: Two N/O rated at 1 Amp 30 Volts
Codes: 1,024 (set by 10 dip code switches)
Dimensions: 5.5 x 1.5 x 3.625 inches
If you are not positive that this is the correct item for you, please email us. We are more that happy to assist you in determining the correct item for your application. If you need to contact us for assistance please include the Make and Model number of the garage door opener, radio receiver or transmitter. The more information you include for us, the easier it is for us to assist you in determining the correct item. We would rather have you contact us than end up with the wrong item and have to return it.