B8000 drill for drilling and glue is a special adhesive plastic drill in a single matrix composite multi-purpose industrial grade adhesives and sealants,
B8000 drill glue on the surface of many materials with a strong adhesive force and flexibility after curing with ultra-high, making it a non-adhesive or sealing material surface common ideal with plastic.
B8000 glue stick drill meet plush gloves, scarves, hats, cloth and other industries need to stick drill
Adhesive characteristics: a permanent adhesive ability of different materials, super adhesion and adhesion.
Sealing characteristics: seal and isolate the gas, liquid, air flow in the underwater environment with plastic long maintained excellent adhesion strength.
Impact resistance: high elasticity, can be stretched to 900 percent of its own length without breaking, valid contract with sticky stretch characteristics of the material surface, to improve the durability of load-bearing structure.
the technical parameters
Solid content: 28% 35% (by weight)
Density: 11.1 lbs / gal
VOC: 1.198 g / l
Dry time: 5 minutes
Full cure time: Films: 24 hours; thick: 48-72 hours
Storage: stored at temperature 10 Degree to 27 Degree
Freeze / thaw: Before opening the lid so that products reach room temperature
Viscosity: 100,000 cps (in)
Shelf life: 12 months
Stretching strength: 3,500 lb / in2 (ASTM D-412)
Elongation: 900% (ASTM D-412)
Chemical resistance: excellent resistance to water, acid and alkaline energy
Temperature range: -0Degree ~ 66 Degree (destruction test 102Degree )
You can paint time: 24 hours
Use methods and precautions
1. should read the instructions before use, use in a well-ventilated environment.
Bonding surface should be clean, dry, dust-free, it is a difficult adhesive materials,
Before using the surface to be properly processed to ensure adhesion strength.
Best use of temperature between 21 to 29 , before you use a small area test.
2. The B8000 adhesive is directly applied to the surface to be bonded for maximum strength,
Drying the adhesive member is placed so that 24 to 72 hours. Curing time will be extended when the winter temperature,
But it will not affect its bond strength, curing time will be shortened under high temperature environment.
You can use hand-held hair dryer to speed up the cure should be set at a low temperature profile, not directly into the colloid.
3. You can not remove with acetone or naphtha dried glue. The cured material can be removed with a tool or scrape.
The fibers used in the adhesive products, do not dry fiber product
High Strength Glue x 1 pc