Multi-Code 1099 Single Channel Gate Garage Door Opener Radio Receiver by Linear MCS109950 With F-Connector Antenna 10 DIP On/Off Type Code Switch On 300Mhz Or 310Mhz. Full Part Number 109950.
Now Manufactured by Linear Corporation MSC109950.
Replaces Multi-Code 109930, 109940, 302850, Stanley 109931.
Compatible with Multi-Elmac 10 DIP code switch type gate or garage door remotes.
This Multi-Code model 1099 also listed as the 109950 is a one channel, 12 or 24 volt, F-connector type antenna gate or garage door opener radio receiver that works with all Multi-Code and compatible remote controls that have 10 DIP type code switch's on 300Mhz. The Multi-Code 109950 replaces several of the older models and features auto voltage sensing for 12 or 24 volt AC or DC systems and can work on Multi-Code 300Mhz or Stanley 310Mhz frequencies by changing an internal jumper. The Multi-Code 109950 receiver can control one garage door opener or gate motor and can be used as a replacement or upgrade of older radio receivers. An optional coaxial remote antenna mounting kit is available sold separately for situations that require the antenna to be located away from the receiver. This is a brand new item that comes in a plain white dealer box. Includes 8" wire antenna, 3 ft. coaxial cable, bulkhead F-connector and programming instructions.
The Multi-Code 109950 by Linear Corporation receiver is directly compatible with the following remote models:
Digi Code: 5010, 5012, 5030, 5032, 5040, 5042, 5060, 5062, 5070, 5072, Multi Code: 1089, 3060, 3070, 3083, 3089, 4120, 4140, 306010, 307010, 308301, 308911, 412001, 414001, Multi-Elmac, Challenger: MC1010, MC1020, MC4210, MC4220, Heddolf: M219, M220, 220-300, 219-300, Stanley: 1016, 1018, 1027, 1037, 1040, 1044, 1047, 1049, 1050, 1076, 1079, 1082, 1100, 24911, 51-4271, 51-4272, 51-4369, 51-4726
Not all compatible models may be listed.
Replaces Multi-Code 109930, 109940, 302850, Stanley 109931 Radio Receivers.
Dual frequency can be set to Multi-Code or Stanley mode by internal jumper
Auto voltage sensing no jumper needed to set operating voltage
Activates one device. Ideal for use on gate openers
Antenna with 3 ft. coaxial cable and bulkhead connector are included. Remote antenna mounting kit sold separately
Power: 12-30 Volts AC or 10.5-30 Volts DC
Frequency: 300 or 310 MHz jumper selectable
Codes: 1,024 (set by 10 dip switches)
Dimensions: 5.5 x 1.5 x 3.625 inches
If you are not positive that this is the correct item for you, please email us. We are more that happy to assist you in determining the correct item for your application. If you need to contact us for assistance please include the Make and Model number of the garage door opener, radio receiver or transmitter. The more information you include for us, the easier it is for us to assist you in determining the correct item. We would rather have you contact us than end up with the wrong item and have to return it.