**Do not apply with a household iron.** For best results, please use a heat Press Machine.
1. Set temperature at 327 degrees Fahrenheit.
2. Set pressure at medium to heavy.
3. Remove the white plastic backing from the transfer.
4.Place the transfer face up on the fabric.
5. Press for 13 seconds.
6. Let cool for several minutes and peel off the plastic very slowly.
7. Press again directly on the design for 5 seconds.
These instructions might vary depending on the transfer machine being used for the application. Variances in time, pressure, and/or temperature might be necessary. Proper temperature testing of the heating element is strongly recommended.
Sizing Info:7" x 3"