The eTrex Summit comes on the heels of the extremely popular eTrex, which was designed for both marine and recreation use. This new all-in-one navigation device for the outdoor enthusiast is the first combination GPS, altimeter, and electronic compass. The electronic compass provides bearing information when you're standing still and the altimeter determines precise altitude, so you can tell how high you've climbed and your rate of ascent.
Like its predecessor, the eTrex Summit boasts a powerful 12 parallel channel GPS receiver and comes packaged in a small, sleek case with operating buttons located on either side of the unit. The case is completely waterproof to withstand immersion in one meter of water for up to 30 minutes.
Shipping Weight: 1.1 pounds
Detailed Product Information:
Receiver: Differential-ready, 12 parallel channel GPS receiver continuously tracks and uses up to 12 satellites to compute and update your position
Sensors: Electronic compass for accurate bearing information while standing still; barometric altimeter with local pressure and 48-hour automatic pressure-trend recorder; elevation computer
Elevation computer provides current elevation, ascent/descent rate, minimum/maximum elevation, total ascent and descent, average and maximum ascent and descent rate
Waypoints: Stores 500 waypoints with name and graphic symbol
Tracks: Automatic track log saves up to 10 tracks to retrace your path in either direction
Route: 20 reversible routes with up to 50 waypoints (available only by the free update offered on Garmin's website)
Display: 2.1''H x 1.1''W (5.4 x 2.7 cm) high-contrast LCD with bright backlighting
Case: Waterproof to IEC 529 IPX7 standards (submersible for 30 minutes at a depth of 1 meter) NB: Electronics are protected if immersed, but battery compartment may get wet. Make sure batteries and compartment are dry before using.
Trip computer: Current speed, average speed, time of sunrise/sunset, resetable maximum speed, trip timer, and trip distance
MapSource Compatibility: Trip and Waypoint Management software on all MapSource CDs can be utilized to transfer waypoints, routes and tracks between PC and the eTrex. You can plan a route on your PC using the map for reference and then transfer it to the eTrex or upload a series of waypoints you have recorded on the eTrex to your PC to archive or edit and reload to the receiver.
Any quantities are available. Email me if the quantity you want is not listed or you would like a larger order.